Mast Wall Lamp

Wall Lamp · Die-Cast Aluminum · Aluminum / Gold / Black · GU5.3 · Marine-Inspired

This fixture is not compatible with standard US junction boxes (J-Box). It requires direct hardwiring by a licensed electrician using a dedicated wall mounting system. If you are in the US, consult a licensed electrician to confirm your wall installation method before purchasing this lamp.

The Mast Wall Lamp is die-cast aluminum throughout — the body formed by forcing molten aluminum alloy into a precision mould under high pressure, producing a component that is denser, dimensionally tighter, and more heat-stable than sand-cast or stamped aluminum. The compact form — 8 cm deep and 14 cm tall — sits close to the wall and directs its GU5.3 light source with a focused, functional intention. The marine-inspired design lineage is present in the material choice and the restrained silhouette: raw, purposeful, without decorative excess.

Three finishes — natural aluminum, gold, and black — shift the fixture between the industrial and the refined, all on the same die-cast form. At 8 × 14 cm, the Mast is a compact accent sconce — suited to corridors, bedroom walls, stairwells, and any position where a precise, low-profile point of wall light is needed rather than a broad ambient source.

Finish — Choose at Checkout

Natural die-cast aluminum — the raw material finish, cool and industrial. Suits minimalist, Bauhaus, and contemporary-industrial interiors.

Gold-toned aluminum — warmer, more refined. The marine form in a warm metallic reads as nautical-luxe. Suits eclectic, warm-neutral, and Art Deco interiors.

Matte black aluminum — the most graphic and architectural. The compact form reads as a dark geometric accent. Suits contemporary, Scandi, and dark-palette interiors.

Dimensions

Specifications

Downloads

FAQ

Standard US junction boxes (J-Box) are recessed into the wall or ceiling and have a standardised mounting system that US-market fixtures are designed to attach to. European and international fixtures like the Mast use different mounting hardware that does not interface with J-Box brackets. Your electrician will need to install a surface-mount or direct-wall attachment system appropriate to the lamp's backplate — this is a routine task for a licensed electrician familiar with international fixture installation. Contact us before ordering if you want to confirm compatibility with your specific wall construction.

Aluminum is the most industrial and raw — the natural die-cast surface reads as functional and material-honest. Best for minimalist, Bauhaus, and contemporary-industrial interiors where the lamp's purpose is visible and undecorated. Gold shifts the marine form toward the refined — a warm metallic on a compact, utilitarian shape reads as nautical-luxe and suits eclectic, warm-toned, and Art Deco interiors. Black is the most graphic — the compact form reads as a dark geometric accent against the wall, suiting contemporary, Scandi, and dark-palette interiors.

GU5.3 is the bi-pin base standard for MR16 reflector capsule bulbs — a compact low-voltage bulb widely used in recessed and track lighting. The Mast uses the GU5.3 at 12V DC, which means a 12V LED driver must be installed in the circuit (your electrician handles this). When purchasing bulbs, look for GU5.3 MR16 12V LED — not 240V mains GU5.3, which is a different product. Recommended: 5–8W at 2700–3000K warm white. Beam angle 24° for a focused wall accent; 36–60° for softer ambient coverage.

Yes, when the 12V LED driver installed by your electrician is a dimmable constant-voltage LED driver and the GU5.3 LED bulb is rated as dimmable — specify both conditions when briefing your electrician and when purchasing bulbs. The dimming is controlled at the driver level by a compatible wall dimmer or smart control (depending on the driver type). Confirm the full dimming specification with your electrician before installation.